Basic Knowledge

From TTWiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

General Layout

The first thing you have to understand is, that the tracks in the Locomotion engine are as good as flat, so you can't include bridges or whatsoever into your track sprites; these have to be made in the Bridge section (not yet done)


Preparations before Modelling

Second, before you start modelling in max you should create a dummy Mesh, which represents exactly one Locomotion world unit, which is 5x5x2.5, in which you should build your track model. (I used a 50x50x25 unit Mesh)

It's important to understand that your model shouldn't be larger than said Mesh.


Track types

Now that we have the dummy Mesh, which represents 1 World unit; we're going to have a look on how many World units each type of track requiers.

In the following Chart, each black and grey dot represents one World unit, your modeled track peace must not leave these world units, or you are going to end up with a mess.


Straight track

Streight.jpg

Diagonal Track ...

Narrow curve

Curve2.jpg


Normal curve

Curve1.jpg

Wide Curve ...

S-Bend

Sbend1.jpg

Slope ...

Narrow Slope ...

Sloped Normal Curve ...


Back to Creating new Sprites with 3dsMax